How Should I Clean My Carpets?

Carpet cleaning like cooking can be done using different recipes and getting satisfactory results. Lets look at some of the methods currently being used. A skilled carpet cleaner can get the job done using almost any machine or method. Hot water extraction commonly called steam cleaning uses the hottest water possible to get the soil out of a carpet. Pressurized hot water is sprayed onto the carpet and immediately vacuumed off. The pressurized water provides agitation. Water can be heated to as high as 300 degrees f in the carpet machine. After the water passes through hose and wand and hits the carpet it can be as hot as 120 to 250 degrees f. The more suction the carpet machine has the better. The dirty water is vacuumed into a tank for latter disposal. Pre-spraying the carpet and agitating heavily soiled areas with a carpet rake helps get the carpet cleaner. It is beneficial to rinse the carpet with an acidic rinse to return the carpet to a neutral state. Also air movers can speed drying.

During steam cleaning if the furniture is moved and the carpet is cleaned, the following should be done to protect the carpet when the furniture is put back into place on the damp carpet. Foam blocks or plastic squares can be put under the furniture legs to prevent varnish or rust stains from developing.

Bonnet cleaning or absorbent pad cleaning is used when a carpet is not too heavily soiled. For example between steam or restorative cleanings. This is referred to as maintenance cleaning. Some popular methods of bonnet cleaning mix club soda (carbon dioxide and water) with a bonnet cleaning solution and spray it onto the carpet as a mist. This is not technically dry cleaning but it is a lot drier than steam cleaning. A cotton pad is rotated on top of the carpet using a low speed floor machine at 175 rpm. The pad is lubricated by the cleaning solution and picks up soil. The pad is then soaked and rung out in a bucket of bonnet cleaning solution. The pad can be used again until it is filled with soil. At this point a new pad is put into service. The bonnet or absorbent pad can be use again after washing.

The bonnet cleaning method can be used in conjunction with steam cleaning to improve the overall cleaning. Soil which can wick back in heavily soiled areas can be pulled from the carpet fibers while helping the drying process.

The cleaning methods just described are just 2 of the more popular methods currently being used in 1 form or another. Shop around and experiment and find the one that pleases you. Happy cleaning!

Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source